Subscribe to our RSS Feeds

Hacking Windows XP Password

0 Comments »
1. Restart you computer

2.When booting, press F8 and select "Safe Mode"

3.After getting to the user menu. Click on a user and
this time it will not ask you for a password

4.Go to Start>Run and type "CMD" (without the quotes).

5.At command prompt type in "cd C:Windows\System32"
(without the quotes), I am assuming C is your System/Windows Drive

6.For safety purposes first make a backup of your Logon.Scr file..
You can do this by typing in "Copy to Logon.scr to Logon.bak" (without the quotes)

7.Then type "copy CMD.EXE Logon.scr"(without the quotes)

8.Then type this command, I will assume that you want to set Administrator's password
to "MyNewPass" (without the quotes)

9.Now, type this in (I am assuming that you are still in the directory C:WindowsSystem32) ,
"net user administrator MyNewPass" without the quotes

10. You will get a message saying that it was successful, this means Administrator's new password is "MyNewPass" (without the quotes)

11. Restart the PC and you will login as Administrator (or whatever you chose to reset) with your chosen password
6:40 PM

Change your PC to morning alarm

0 Comments »
Now this is specially for the ones who are too lazy to get up even when the trust cellphone dies screeching its lungs out.
Its pretty simple

Creating the playlist
create a playlist of your favourite songs in Winamp, WMP or any other player. Export the playlist as a M3U playlist. M3U is generally accepted by almost every player.

Triggering the alarm
point to start> programs >accessories > system tools >scheduled tasks
Create a new task and choose program as windows media player or winamp (May work with others too but I haven't tried anything else)
Choose "daily", Enter the time and choose "every day" at next screen.
It would now ask for password (leave blank in case you don't have one)
Right click on the newly created task and check the "run only if logged in" check box. In the properties. Append the path to the playlist you created in the "run" text box. "D:\windows media player\wmplayer.exe" K:\Playlists\smoothies.m3u
It should now look like the text inside quotes is my WMP's path. It may vary for you. The text after WMP's path is the one to the playlist.
Click OK and you're done.
6:22 PM

Desktop Hacking

0 Comments »
Multiple Google Talk

Now it's turn to use multiple google talk. Previously we covered that how to run multiple Yahoo messenger using Yahoo Pal!.

Well for google talk, you don't have to download any software. Just follow the following simple steps.

1) Create a Shortcut on ur Desktop.

2) In the field 'type the location of the item' paste the following source...

c:\program files\google\google talk\googletalk.exe" /nomutex

3)If this loction doesn't work, then locate manually by clicking on browse option. Then go to c: -> program file -> google-> google talk->googletalk.exe

and then paste /nomutex in the end of manually located source.

Finished. Now you can run multiple Google Talk.

........................................................................................................
Yahoo Pal!

Yahoo! Pal is an invisible program, it will automatically attach to running Yahoo! Messenger and new Yahoo! Messengers you run after Yahoo! Pal, and add menu bar to the Yahoo! Messenger windows. You can also quit it by clicking its menu.

∙ Allow multiple accounts on the same computer.

∙ Automatically reply when you are away.

. Send a random quote to your friend.

∙ Hotkey to hide Yahoo! Messengers windows.

CLICK HERE TO DOWNLOAD.
http://216.219.88.102/dh/downloady1.html
........................................................................................................

BIOS PASSWORD HACK

To perform this hack you will need:

A #1 or #2 Phillips-head screwdriver, or (less likely) a T-15 TORX driver or a 1/4" hex nutdriver, to open the case

Needle-nosed pliers if you are working with jumpers

A small flashlight or headlamp

With tools at hand, perform the following steps:

Turn the PC off (this means a total shutdown, not merely standby or hibernate mode) and disconnect the AC power cord.

Remove the cover from your system (this step may require tools, undoing a thumbscrew, or flipping a latch or two).

Refer to the user manual for the motherboard to find out how to "reset CMOS" memory. You may also find a label for specific jumper or switch settings marked on the system board.

Change the switch setting or jumper position to a specific position or remove the jumper entirely as prescribed in the manual to clear or reset the CMOS memory.

Wait 20-30 seconds for the memory to clear out from lack of power.

After 20-30 seconds put the switch or jumper the way it was before for normal use.

Reconnect the power cord and start up the system to see if the settings have changed to defaults.

Shut the PC down, disconnect the power cord, replace the cover, reconnect the power, and power up the PC.

Enter the BIOS setup program to configure the system as needed. This may include setting the date and time, selecting disk drive parameters, and selecting which devices the system uses to boot up with first.

If your system does not have a "reset CMOS" jumper or switch , the only option is to locate and remove the coin-style battery cell (or on some very old PCs, the battery pack), as shown in , that provides the power to the CMOS memory.

SOURCE : http://www.oreilly.com/pub/h/2245

.........................................................................................................
HACKING WINDOWS LOGON PASSWORD / SAM FILE ( Windows NT/2000/XP/2003 )

SAM File - Holds the user names and password hashes for every account on the local machine, or domain if it is a domain controller.

-What are password Hashes?

Actually when we enter password in Windows Logon Tab, Windows encrypts our password using an encryption scheme that turns our password into something that looks like this:


65464564s1d4d2c9a56s42166d55se

SAM file can be found under C:(default OS drive) -> WINNT -> System32 -> Config -> SAM.

SAM file can be cracked by sing a simple freeware software "SAMInside".

Troubleshooting : While copying SAM file it shows an error of "Access Denied" or "File in Use". Actually copying of SAM file is restricted by Windows.

There are many alternatives to copy SAM file.

[1] You can boot your system by a Live Linux CD such as Knnopix or Fedora. Linux has access to all Windows Files. This way SAM file can be easily copied.

.........................................................................................................
KEY LOGGER

If you want to know what other users are typing on your machine, this heavy weaponry addition to your Spy Arsenal will allow you to know everything! Simply install Family Key Logger, set the 'Start in hidden mode' and 'Remove from tasks list' options and you are ready to go. The program will reside in memory while being absolutely invisible to everyone except you. You will only have to press the Unhide key combination on the keyboard to see what your kids or your wife or your employees were typing.
And remember:

You have the right to know!
Source : http://www.spyarsenal.com/
.........................................................................................................

SPEED UP XP BOOTING

Start Registry Editor (Regedit.exe).

Locate the following key in the registry:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Ses

sionManager\MemoryManagement\PrefetchParameters

Make sure you backup the keys by exporting them to a .reg file.

On the EnablePrefetcher value, change the setting from 3 to 5 (decimal).

Close the registry editor.

Restart your computer.
12:30 PM